BLUE JOTTER

  • Subscribe to our RSS feed.
  • Twitter
  • StumbleUpon
  • Reddit
  • Facebook
  • Digg
Showing posts with label toddlers. Show all posts
Showing posts with label toddlers. Show all posts

Thursday, 8 October 2009

Toys

Posted on 14:16 by Unknown
Our son has reached The Age of Exploration. At last, he can pull himself upright and toddle along on his hind paws - so long as a support of some kind remains within reach. To give him some walking practice and a little independence, I sketched out a pushing/walking toy, then started digging through our wood-pile. Soon, odds and ends had been sawed and screwed into something closely resembling the sketch below (the height for the bars chosen to be just around our son's shoulders, low enough to be pushable, too high to fall over). One point to note: sanding off all edges and any rough surfaces will save grief later. With even a very cheap random orbital sander, this does not take long.


Version 1: Sled with upright handle

Full of anticipating, I presented the result of my labours to my son, who got the idea of the toy straight away, and set off at high speed, cackling with glee... and seconds later, rammed it a cupboard dead-on. No damage done, but also, no possibility of turning. The next problem was that he stood inside the sled, and tried to pull it over his own toes.


Version 2: platform to stand on, double-ended

I decided to solve the turning/reversing problem by making the pusher double-ended, duplicating the existing upright handle, and solved the standing-in-the-middle problem with a plywood platform. As I finished screwing this on, it occurred to me that I should have used bolts to secure the uprights to the base - then it would be very easy to take the whole thing apart into flat pieces for storage or transport.

The modifications were well received by my tiny test pilot: he used an upright to pull himself to his feet, then clambered grinning onto the platform, and tugged mightily at a handle, doing his best to rock the whole contraption. Which gave Dad an idea.


Version 3: build-in rocking function!

The final (so far) modification required some fairy delicate wood shaping: I made a long shallow curve from a single piece of wood, sawing, chiseling, sanding, then split it lengthwise into two identical pieces, which I glued with ordinary wood glue (do not risk snagging a screw head on your partner's tiles/carpet!) carefully to the existing runners, then clamped and allowed to set overnight.

Next morning, a very proud Dad presented his soon with the push-me-pull-you version. Son discovered that the new version made a very pleasing racket as it rocked on the kitchen tiles, and Dad was relieved to find that he hadn't overdone the rocking motion (no danger of head-over-heels).

This has been my first real foray into toy-making, at least as an adult; my son has got a lot of fun and exercise from a very simple toy, and I just as much, from the pleasure of making, of giving, and of seeing his fun.

Dads, Mums, Aunties and Uncles: to your sheds! Go build!

Read More
Posted in babies, carpentry, toddlers, toys, woodwork | No comments
Older Posts Home
Subscribe to: Posts (Atom)

Popular Posts

  • CPU Hog
    So there I was, tapping away at quotidian tasks, when I noticed my PC was responding with all the dash and verve of a fossilized member of T...
  • Making a new rudder, part 3
    Designing a rudder, part 1 Designing a rudder, part 2 Making a rudder, part 1 Making a rudder, part 2 After lots of careful shaping of detai...
  • Designing a new rudder, part 2
    By measuring photographs and doing a little maths, courtesy of the NACA 0012 formula, I was able to discover what size and shape my new rudd...
  • Saving up for a... sunny day?
    You may have heard the advice that you should have cash on hand to cover living expenses for some few months, just in case - "rainy day...
  • Making a new rudder, part 1
    Following on from the previous posts on the design of rudder foils, our hero now begins the tricky fabrication stage. As discussed previou...
  • Installing DELL laptop drivers from CABs
    Recently, I had to rebuild my Dell laptop.  Not fun.  Hoping to save someone else a little time, here is how I got all the drivers sorted: F...
  • Making a new rudder, part 2
    This post is part of a series on making a fibreglass rudder with a foam core: Designing a rudder, part 1 Designing a rudder, part 2 Making a...
  • Cleaning a microwave oven
    The levels of dried-out burnt-on food on the roof of our microwave oven were well below bachelor-tolerance levels, and, considering the dose...
  • Error Propagation: an unexpected beauty
    So, say you have a couple of measurements, x and y, with some associated uncertainty; the true value of x might be, say, 3 units above or be...
  • Review: Imray Chart Plotter (ID30)
    In the current economic climate, the demand for my services has decreased; so, less cash. Luckily, this also means more time for sailing. ...

Categories

  • 3d printing
  • adapter
  • aerofoil
  • Android
  • app
  • apps
  • arcturus
  • astronavigation
  • babies
  • bats
  • battery
  • boat
  • cam
  • camcorder
  • carbon fibre
  • carpentry
  • celestial navigation
  • certainty
  • charts
  • chemistry
  • clean
  • composite
  • computer vision
  • corecell
  • CPU
  • debugging
  • dementia
  • digital charts
  • error
  • error propagation
  • ertalyte
  • fibreglass
  • financial independence
  • foil
  • formula
  • frugality
  • geometry
  • Google Desktop
  • grp
  • gudgeons
  • how to
  • ideas
  • imray
  • installing linux
  • interesting
  • investment
  • latitude
  • linnaeus
  • linux
  • lock screen
  • longitude
  • maths
  • microwave
  • moon
  • navigation
  • operating system
  • oven
  • pc
  • pet-p
  • probability
  • Process
  • programming
  • puppy linux
  • pythagoras
  • rapid prototyping
  • repair
  • retirement
  • review
  • rudder
  • Samsung Galaxy
  • savings
  • shapeways
  • Speed Launcher
  • statistics
  • sugru
  • toddlers
  • toys
  • wander alarm
  • wide-angle
  • windows
  • wood
  • woodwork
  • yacht

Blog Archive

  • ▼  2012 (3)
    • ▼  October (1)
      • Installing DELL laptop drivers from CABs
    • ►  July (1)
    • ►  February (1)
  • ►  2011 (2)
    • ►  December (1)
    • ►  August (1)
  • ►  2010 (6)
    • ►  October (1)
    • ►  August (1)
    • ►  July (2)
    • ►  May (1)
    • ►  April (1)
  • ►  2009 (13)
    • ►  October (2)
    • ►  September (2)
    • ►  August (1)
    • ►  July (1)
    • ►  June (4)
    • ►  April (1)
    • ►  February (1)
    • ►  January (1)
  • ►  2008 (9)
    • ►  December (2)
    • ►  November (7)
Powered by Blogger.

About Me

Unknown
View my complete profile